Muratec MFX-2590 Quick Manual page 110

„ Setting the Transmission Method (Memory Transmission / Real
Time Transmission)
There are two types of automatic transmission; memory transmission, which starts
transmission after the document is scanned, and real time transmission, which performs
transmission while the document is being scanned.
This explanation indicates the procedure for selecting either transmission method for a
single fax transmission.
• Real time transmission directly transmits the document to the other fax machine
without scanning the document into memory. Transmission starts after the
transmission operation, which allows you to easily confirm that the fax is sent to the
other machine.
• Memory transmission transmits the document after scanning the document into
memory. This allows you to take the document and leave without waiting for the
transmission to end, enabling you to save time.
1
Load the document, and press <Fax>.
• For details on loading documents, refer to Chapter 1, "Loading Documents" in the User's
Guide.
• Set the resolution and contrast as necessary.
2
Press the [Advanced] tab.
3
Press [Memory Tx].
• The memory transmission function is enabled / disabled each time you press [Memory Tx].
• Select [ON] to perform memory transmission or [OFF] to perform real time transmission.
4
Press [ON] or [OFF], and press [Enter].
(See page 3-21.)
Basic Faxing
1
2
3
3-25