Reading Journal Reports - Muratec MFX-2590 Quick Manual

Reading Journal Reports

For Fax Communication
„
• Transmission Journal
Example Print
10
Number Item
1 No.
2 Destination
3 Mode
4 Start Time
5 Time
6 Page
7 Sender
8 Result
9 Note
10 Printed date
11 −
*1 When a communication error code is printed, confirm the content of the error and perform the
transmission again. For details, refer to Chapter 4, "Error Messages" in the Administrator's Guide.
*2 Only printed for a daily communication report.
3 4 5
The job number
The destination name or fax number
The resolution used for the communication
The time the communication started
The time required from start to finish for the communication
The number of pages transmitted
(User name) : Only when a user is logged in
GUEST : When transmission is performed without logging in
to the machine
ADMINISTER : When the machine performed transmission with a
function such as the archive transmission or scan path
notification function
OK: Completed normally
*: ECM Mode transmission
#: Super G3 transmission
Code: The communication error code
The type of communication is printed for the following types of
communication: Nothing is printed for other types of communication.
• Manual Tx
• Polling Tx
• F-Code Tx
• Broadcast
• PC-Fax Tx
• PC-Fax F-code Tx
• Archive Tx
• Rerouted Fax Tx
*2
The date and time that the journal report was printed
The date and time that the journal report was printed, or the date
and time that communication history started to be stored for a daily
communication report
11
6 7 8
Description
*1
Managing the Communication History
9
6-11
1
2
3
4
5
6