Muratec MFX-2590 Quick Manual page 182

21
Press [Close].
To continue to register or edit F-code bulletin boxes, repeat the procedure in steps 4 to 20.
„ Deleting F-Code Boxes
1
Press <Setting>.
2
Press the [Resister] tab.
3
Press [F-Code Box].
4
Select the box you want to delete, and press [Delete].
5
If an I.D. code is set, enter the I.D. code using the numeric keys, and press
[Enter].
If an I.D. code is not set, proceed to the next step.
6
Press [Yes].
• Press [No] to close the screen without deleting the box.
• To continue to delete F-code boxes, press [Enter], and repeat the procedure in steps 4 to 6.
F-Code Communications
1
2
3
4
4-35