7
Press [Next Doc] or <Start>.
When the loaded documents have been scanned, the message "Set next document" is
displayed.
8
If you want to scan another document, repeat steps 6 to 7.
9
When you have finished scanning all the documents, press [Complete].
Duplex Scan
You can easily scan a two-sided document using this mode. Just load the duplex document
in the ADF, and press <Start>.
1
Load the document in the ADF, and press <Scan>.
2
Press the [Advanced] tab
3
P
ress [Duplex Scan].
2-12
Advanced Scan Features
.