Muratec MFX-2590 Quick Manual page 107
Plain-paper digital fax/copier/printer/scanner
Hide thumbs
Also See for MFX-2590:
- Administrator's manual (165 pages) ,
- User manual (139 pages) ,
- Copier manual (45 pages)
Table of Contents
Advertisement
3
Press [Resolution].
If [Resolution] is not displayed, press the [Advanced] tab and then select [Resolution].
4
Select the desired resolution, and press [Enter].
5
Specify the destination, and press <Start>.
•
For details on specifying the destination, refer to "
page 5-2.)
•
If you loaded the document in the ADF, this concludes the procedure.
•
If you loaded the document on the document glass, load the next document, and press
[Next Doc]. Press [Tx Start] to start transmission.
Note
•
The Super Fine mode may not be supported by the destination machine. In this
case, the optimal resolution will be automatically selected.
•
The communication time differs according to the selected resolution.
3-22
Basic Faxing
Selecting from the Address
Book".
(See
Advertisement
Table of Contents
