Setting The Dial Tone Detection - Muratec MFX-2590 Quick Manual

5
Select the reception mode, and press [Enter].
Setting the Dial Tone Detection
„
Select if you set the dial tone detection. Select [OFF] normally.
1
Press <Setting>.
2
Press the [Management] tab.
If an administrator password is set, enter the password and press [Enter].
3
Press [User Install].
4
Press [Dial Tone Detect].
5
Select [ON] or [OFF] to detect or not detect the dial tone, and press [Enter].
If you select [ON], you cannot transmit the faxes through a line that cannot acquire a dial
tone.
Initial Setup (User Install)
1
2
3
3-9