4
Specify the destination.
For details on specifying the destination, refer to
5
Press <Start>.
•
If you selected a destination from the address book, this step is not required.
•
If you loaded the document in the ADF, this concludes the procedure.
6
If you loaded the document on the document glass, load the next document, and
press [Next Doc].
To finish scanning, press [Complete].
7
Repeat step 6 to scan all the documents.
To finish scanning, press [Complete].
Note
You can register often-used destinations in the [Faves Destination] tab.
7-31.)
"Specifying
Destinations".
Basic Scanning
(See page 5-2.)
(See page
1-3
1