Setting Document Categories (Category) - Muratec MFX-2590 Quick Manual

5
Specify the destination, and press <Start>.
For details on the procedure, refer to
Note
• The notification e-mail is sent to the e-mail address registered in the user
information. This function can only be used if an e-mail address is registered in the
user information.
• For details on registering user information, refer to Chapter 3, "Registering Users"
in the OfficeBridge Guide.

Setting Document Categories (Category)

You can add a category name (document category) to the scanned document. Setting a
document category enables you to filter the documents displayed in the list of documents
saved in a box, and enables you to search for documents via their category. You can also
set the document category using a document category registered in advance.
Note
• This function can be used with Scan to Box.
• The data is not classified unless you enter a document category. The document
category can also be changed after saving the data.
• For details on registering document categories, refer to "
Document Categories
OfficeBridge Guide.
Setting a New Document Category
„
1
Load the document, and press <Scan>.
2
Press the [Advanced] tab.
3
Press [Category Name].
2-34 Advanced Scan Features
"Basic Scanning".
" (see page 7-50) or "Setting Templates" in Chapter 3 of the
(See page 1-2.)
Registering / Editing