4
Select the TWAIN box you want to register or edit the name or I.D. code for.
5
If an I.D. code is set for the TWAIN box, enter the I.D. code and press [Enter].
If no I.D. code is set, proceed to step 6.
6
To register or edit the name, press [Box Name].
If you do not want to register or edit the name, proceed to step 8.
7
Register or edit the name, and press [Enter].
•
Up to 16 characters can be entered.
•
For details on entering characters, refer to Chapter 1, "Entering Characters" in the
Administrator's Guide.
Scanning Documents Using a TWAIN Box
1
2
2-47