Muratec MFX-2590 Quick Manual page 303

5
Select the function to set.
In this example, [Resolution] is selected.
6
Select the default value, and press [Enter].
7
Press [Close].
To continue to change other default values, repeat steps 4 to 7 of the operation.
„ List of Default Transmission Settings
Function
Preview
Resolution
Contrast
(Option)
Stamp
*1
Next Document
Setting
TTI
Cover Page
Tx Report
7-42 Specifying Default Settings
Description
Set the default preview setting.
This sets the default resolution when a
document is scanned.
This sets the default contrast when a
document is scanned.
You can stamp a document that has been
scanned (or transmitted) using the ADF and
check it has been scanned (or transmitted).
You can scan a series of separate documents
and transmit them as a single document.
The sender name printed at the top of a
document received at the destination.
A cover page containing a simple message
can be attached to the documents.
The transmission result is printed. Or can be
checked via e-mail.
Settings
ON
OFF
Normal
Fine
Super Fine
Photo
Background
Lightest
Lighter
Normal
Darker
Darkest
ON
OFF
ADF: ON
OFF
FBS: ON
OFF
ON
OFF
ON
OFF
OFF
Print
e-mail
Reference
page
4-4
3-21
3-23
4-10
4-7
4-12
4-13
6-2