Muratec MFX-2590 Quick Manual page 308

8
Enter or edit the subject, and press [Enter].
For details on entering characters, refer to Chapter 1, "Entering Characters" in the
Administrator's Guide.
9
To enter the message, press [Text].
If you do not want to enter the message, proceed to step 11.
11
Enter or edit the message, and press [Enter].
• For details on entering characters, refer to Chapter 1, "Entering Characters" in the
Administrator's Guide.
• Press [ ] to enter a line break. A line break takes up two characters.
11
Press [Close].
To continue to register or edit templates, repeat the procedure in steps 4 to 11.
Registering Other Settings
1
2
3
4
5
6
7
7-47