Setting The Separator Page - Muratec MFX-2590 Quick Manual

„ Setting Auto Distribution
If auto distribution is enabled, the forwarding conditions set individually are enabled and
faxes will be distributed according to the registered conditions.
1
Press <Fax>.
2
Press the [Advanced] tab.
3
Press [Auto Distribute].
4
Select [ON], and press [Enter].
If you select [OFF], the auto distribution setting is disabled.

Setting the Separator Page

You can change the first sheet of paper with another type of paper to make it easier to
separate received documents. For example, if you use colored paper for the separator
page, it is easy to identify each individual fax job.
• Separator Cassette: Select the cassette or tray to use for the first sheet of paper.
• Print Document :
Blank
Print Document: [OFF]
Note
• Paper sources will only appear on the control panel if they have been installed.
• If a cassette is set to not be used for the fax function, you cannot set it as the
separator cassette. For details on paper settings, refer to Chapter 1, "Paper Settings"
in the Administrator's Guide.
Set whether to insert a blank page in the start of the received
document.
Separator page separates each received document.
1 2
1 2
1 2
1 2
Print Document: [ON]
Useful Reception Functions
1
2
3
4
4-65