5
Select the document category that you want to use.
6
Edit the document category, as necessary, and press [Enter].
•
For details on entering characters, refer to Chapter 1, "Entering Characters" in the
Administrator's Guide.
•
If you do not want to edit it, proceed to step 7.
7
Specify the destination, and press <Start>.
For details on the procedure, refer to
Setting the Hold Time (Hold Time)
You can set the storage period (hold time) for documents saved in a box.
Note
•
This function can be used with Scan to Box.
•
You can set a storage period of 1 to 99 days, or unlimited. The day the data is saved
is not included in the storage period. This means that if you set a storage period of
one day, the data will be stored until the day after the data was saved.
1
Load the document, and press <Scan>.
2-36
Advanced Scan Features
"Scanning to a
User".
(See page 1-7.)