Scanning The Next Document (Next Doc.) - Muratec MFX-2590 Quick Manual

Scanning the Next Document (Next Doc.)

You can transmit or save separate documents scanned in a row as a single set of data.
Since you can scan using both the document glass and the ADF, this is useful for
transmitting / saving a combination of documents such as an invoice and a map together.
Note
The next document settings can be set separately for the ADF and the document glass
(FBS).
1
Load the document, and press <Scan>.
2
Press the [Advanced] tab.
3
Press [Next Document Setting.].
4
Select [ON], and press [Enter].
If you select [OFF], the next document setting is disabled.
5
Specify the destination, and press <Start>.
• For details on the procedure, refer to "
• When the loaded documents have been scanned, the message "Set next document" is
displayed.
6
Load the next document to scan.
Basic Scanning". (See page 1-2.)
Advanced Scan Features
1
2
2-11