Setting
Daylight Savings Time
Select the validity for the daylight saving time.
1
Press <Setting>.
2
Press
the [Management] tab.
If an administrator password is set, enter the password and press [Enter].
3
Press [User Install].
4
Press [Set Daylight Saving].
5
Select [ON] or [OFF], and press [Enter].
Setting the Broadcast Transmission Option
Select whether to start transmission when registered destination is selected ("OFF"), or
when <Start> is pressed with all destinations selected ("ON").
Note
The broadcast setting is enabled for both scan transmission and fax transmission.
1
Press <Setting>.
2
Press
the [Management] tab.
If an administrator password is set, enter the password and press [Enter].
3
Press [User Install].
Initial Setup (User Install)
1
2
3
3-7