Operations During Reception - Muratec MFX-2590 Quick Manual

Setting the Reception Method
„
In addition to setting the reception mode, you can also set manual reception or automatic
reception on the screen.
• Auto reception:
• Manual reception: This method receives faxes after <Start> is pressed. For details, refer to
1
Press <Fax>.
2
Press the [Advanced] tab.
3
Press [Auto Rx].
4
Select [ON] or [OFF] , and press [Enter].
Select [ON] to set automatic reception or [OFF] to set manual reception.

Operations During Reception

The information lamp on the control panel flashes during reception. When out-of-memory
reception is performed, the information lamp is illuminated.
3-34 Basic Faxing
This method automatically receives faxes. For details, refer to
for Fax Only (Fax Ready)".
"Primarily Using the Phone (Tel
(See page 3-31.)
Ready)". (See page 3-33.)
Information lamp
"Auto Reception