Muratec MFX-2590 Quick Manual page 108

„ Setting the Contrast
Set the contrast to scan with according to the document.
• Lightest: Select to scan with the lightest contrast.
• Lighter: Select to scan with a contrast lighter than the standard contrast.
• Normal: Select to scan with the normal contrast.
• Darker: Select to scan with a contrast darker than the standard contrast.
• Darkest: Select to scan with the darkest contrast.
1
Load the document, and press <Fax>.
2
Press the [Address Book] tab or the [Num. keys] tab.
3
Press [Contrast].
If [Contrast] is not displayed, press the [Advanced] tab and then select [Contrast].
4
Select the desired contrast, and press [Enter].
5
Specify the destination, and press <Start>.
• For details on specifying the destination, refer to "
page 5-2.)
• If you loaded the document in the ADF, this concludes the procedure.
• If you loaded the document on the document glass, load the next document, and press
[Next Doc]. Press [Tx Start] to start transmission.
Selecting from the Address
Basic Faxing
1
2
3
Book". (See
3-23