Security Functions; Restricting Fax Destinations (Closed Transmission) - Muratec MFX-2590 Quick Manual
Plain-paper digital fax/copier/printer/scanner
Hide thumbs
Also See for MFX-2590:
- Administrator's manual (165 pages) ,
- User manual (139 pages) ,
- Copier manual (45 pages)
Table of Contents
Advertisement
Security Functions
Restricting Fax Destinations (Closed Transmission)
When closed communication is set, fax messages can be transmitted and received
between Muratec machines only (excluding some models). If a passcode is set, faxes can
only be transmitted to Muratec machines that also have a security function and have the
same passcode registered.
Note
•
For details on passcodes, refer to Chapter 2, "Closed Communication" in the
Administrator's Guide.
•
You can also set to always enable closed transmission. For details, refer to Chapter 2,
"Closed Communication" in the Administrator's Guide.
•
When using manual transmission (transmission using an optional handset, an
external phone handset or the [Monitor] function), the closed transmission function
is disabled, even if you set it to ON.
1
Load the document, and press <Fax>.
2
Press the [Advanced] tab.
3
Press [Closed Transmission].
Security Functions
4-47
1
2
3
4
Advertisement
Table of Contents
