Sending Scanned Data To Your Computer (Scan To Home) - Muratec MFX-C2828 User Manual

4.2

Sending scanned data to your computer (Scan to Home)

4.2 Sending scanned data to your computer (Scan to Home)
Configure settings to send scanned data to your computer.
This function is available when the user's Home folder position is registered after user authentication has
been performed with Active Directory.
If the Home folder of the user who logged in is registered in Active Directory, [Home] is displayed in the ad-
dress book. Specify [Home] for a destination to enable you to easily send data to your Home folder.
To authenticate the user to send data to the Home folder, use the [User Name] and [Password] that were used
in Active Directory authentication when you logged in to this machine.
Use the following flowchart to configure settings. Clicking a step jumps to the associated procedure.
Do you use the WINS server?
[WINS Setting]
Reference
- To use the Scan to Home function, the Home folder of the user must be registered in Active Directory.
Also, the user's E-mail address or fax number must be registered.
- When you register the location of the Home folder in Active Directory, use uppercase letters to specify
a computer that has the Home folder using the NetBIOS name.
- For details on how to send a file to the Home folder using SMB, refer to the [User's Guide Network
Scan/Fax/Network Fax Operations].
No
Yes
No
[TCP/IP Setting]
User authentication (Ac-
tive Directory)
[Scan to Home Settings]
[Client Setting]
IPv6 environment?
No
Do you send data to Win-
dows Vista/7/Server
2008/Server 2008 R2?
Yes
[LLMNR Setting]
Finish
4
Yes
[Direct Hosting Setting]
4-6