Outputting By Sets ([Group/Sort]); Outputting By Page Number Or By Set ([Offset]); Printing In A Booklet Format ([Booklet]) - Muratec MFX-C2280 User's Manual Copy Operations

Outputting by sets ([Group/Sort])

Select whether to sort the output sheets or group them when printing multiple sets of copies.
If you select "Sort", the sheets are sorted and output in sequence. For example, "pages 1, 2, 3, 4 and 5" are
printed as a single set and output, and the specified number of sets of sheets are output. While if you select
"Group", the sheets are grouped and output by page. For example, the first page is printed three times and
output as a group. Then, the second page is printed three times and output, the third page is printed three
times and output, and so on.
When you use both the Sort and Offset functions, the output position of each set is staggered to enable you
to easily prepare handouts.
For details, refer to page 15-11.
Tips
- Normally, the Sort and Group functions are switched automatically according to the number of printed
sheets for each set. If the number of printed sheets for each set is 1, the Group function is applied. If
the number is 2 or larger, the Sort function is applied.

Outputting by page number or by set ([Offset])

When multiple sets of copies are printed, the output position of each set is staggered to enable easy sepa-
ration.
You can offset each set of copies by using the Sort and Offset functions. This function is useful for preparing
handouts.
For details, refer to page 15-11.

Printing in a booklet format ([Booklet])

The pages in the original data are arranged and spread in a booklet format and printed on both sides of
sheets. You can also specify the binding position, or insert front and back covers.
For details, refer to page 15-39.
Tips
- To use the Half-Fold/Bind function:
– The Finisher C2280FN2 and Saddle Stitcher C2280SD are required.
Binding Copied Paper
6
6-4