Gp-Gl Separator - GRAPHTEC CE6000-120AP User Manual

8.2
Setting a separator
Regardng the separator settngs, the command that s set as separator s judged as the data juncture when t s
sent. All data up to that juncture wll be plotted, after whch cross cuttng wll be performed.

GP-GL Separator

Set the separator when usng GP-GL.
Reference
Ths settng wll be saved even f the power s shut off.
Operation
1
Press the [PAUSE/MENU] key.
MENU screen s dsplayed.
2
Press the POSITION ( ) key (I/F).
INTERFACE settng screen (1/3) s dsplayed.
3
Press the POSITION ( ) key.
INTERFACE settng screen (2/3) s dsplayed.
4
Press [3] key (GP-GL SEPARATOR).
GP-GL SEPARATOR screen s dsplayed.
5
Press the POSITION ( ) keys to change the current settng.
8-8
Supplement
Perform the settngs n Normal menu.
Supplement
You can set "FS", "H", "J0", "F", or "−".