Decurler Clutch Removal - Lexmark C950 Service Manual

5058-030
Remove the two screws (B) securing the bridge unit top door spring you want to remove.
6.
Remove the bridge unit top door spring.
7.
Reinstallation note: Ensure that the inner guide springs are properly reinstalled.

Decurler clutch removal

Remove the bridge unit assembly. See
1.
Remove the bridge decurler rear cover. See
2.
page 4-244.
3. Release the hooks (A) securing the sensor flag to the machine.
Remove the sensor flag.
4.
Service Manual
4-234
"Bridge unit assembly removal" on page
"Sensor (decurler cover interlock) removal" on
4-229.
Previous
Next
Go Back