Input roller clutch and lever removal (autocompensator clutch)
1.
Remove the left side cover. See
2.
Place the MFP on its right side. Protect the cover from being marred.
3.
Remove four screws (A) in the gear train metal cover.
4.
Remove the clip (B) from the shaft of the input roller clutch assembly.
5.
Remove the screw and lever (pawl) (C).
6.
Remove the clutch assembly. If the pieces come apart, they can be easily reassembled if necessary.
"Left side cover removal" on page
manuals4u.com
manuals4u.com
7003-XXX
4-3.
Repair information
4-23