8
Remove the two screws (A) securing the reverse solenoid.
ACM clutch removal (MX310, MX410)
1
Remove the left cover. See
2
Remove the right cover. See
3
Remove the rear door and cover. See
on page
370.
4
Remove the power supply. See
5
Remove the power supply shield. See
6
Remove the duplex. See
7
Disconnect the cable JF26 from the controller board.
8
Secure right end of the shaft (A) with a pair of needle-nose pliers to prevent it from rotating.
"Left cover removal" on page
"Right cover removal" on page
"Rear exit door removal" on page 369
"Power supply removal" on page
"Power supply shield removal" on page
"Duplex removal" on page
Parts removal
A
279.
294.
339.
341.
289
7015
and
"Rear cover removal"
340.