Decurler Clutch Removal - Lexmark X95x series Service Manual

Remove the bridge unit top door spring.
7.
Reinstallation note: Ensure that the inner guide springs are properly reinstalled.

Decurler clutch removal

Remove the bridge unit assembly. See
1.
2. Remove the bridge decurler rear cover. See
page 4-316.
Release the hooks (A) securing the sensor flag to the machine.
3.
Remove the sensor flag.
4.
5. Remove the screw (B) securing the bracket to the machine.
"Bridge unit assembly removal" on page
"Sensor (decurler cover interlock) removal" on
7558-xxx
4-302.
Repair information
4-307
Previous
Next
Go Back