Stelvio 1200 NTX ABS
CIAL CHECKS FOR THE CORRECT CONNECTION AND LAYING OF CABLES" IN THE "ELEC-
TRICAL SYSTEM INSTALLATION" SECTION.
REAR SECTION
TABLE A - CORRECT FITTING OF THE ODOM-
ETER CLAMP
•
The clamp fixing the odometer cable
must be placed ahead of the brake pipe
guide clamp.
REAR SECTION
TABLE B - FITTING THE FAIRING COMPART-
MENT LID SAFETY RELAY
•
Lay down the main system and clamp
the stop switch system, odometer sen-
sor and fall sensor to the system. Be
careful that the latter does not come
into contact with clips.
•
Attach the relay to the support plate
and fix it keeping the main system be-
tween the plate and the mudflap.
•
Connect the recharge cable and place
it as in the photo.
REAR SECTION
TABLE C - REAR SYSTEM RETAINER
•
Pay attention to the position of the U-
bolt adhesive cable grommets for the
system.
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
Electrical system
ELE SYS - 49