Engine Guard - MOTO GUZZI Stelvio 1200 NTX ABS Service Station Manual

Hide thumbs Also See for Stelvio 1200 NTX ABS:
Table of Contents

Advertisement

Stelvio 1200 NTX ABS
Seat
Rest the vehicle on its stand.
Insert the key in the saddle lock.
Turn the key clockwise and slightly
press the centre of the passenger seat
rear part to facilitate releasing the pin.
Lift the passenger seat and slide it off
from behind.
Unscrew and remove the knobs fixing
the rider saddle.
Remove the rider saddle.
CAUTION
BEFORE LOWERING AND LOCKING THE SADDLE,
CHECK THAT THE KEY HAS NOT BEEN LEFT INSIDE THE
GLOVE-BOX / TOOLKIT COMPARTMENT.

Engine guard

ENSURE THAT THE ENGINE AND THE THERMAL PARTS OF THE VEHICLE ARE COLD BEFORE
OPERATING ACCORDING TO THE FOLLOWING INSTRUCTIONS. PARK THE VEHICLE ON
STAND ON FIRM AND LEVEL GROUND.
Undo the screw and remove the rear
brake oil reservoir.
From the left side of the vehicle, re-
move the nut (1) and the correspond-
ing washer.
Slide off the frame pin (2) from the right
side with the corresponding washer.
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
Bodywork
BODYW - 267

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents