MOTO GUZZI Stelvio 1200 NTX ABS Service Station Manual page 268

Bodywork
•
Remove the TCEI screw (3) (M10x35)
on the upper side.
•
Remove both TCEI screws (4) (M8x40)
in the lower part of the engine guard.
•
Remove the TCEI screw (5) (M8x60) in
the engine guard front section with the
corresponding washer.
•
Remove the screw (6).
•
Remove the hexagonal stud bolt (7)
with the corresponding washer.
•
Remove the left engine guard.
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
BODYW - 268
Stelvio 1200 NTX ABS