MOTO GUZZI Stelvio 1200 NTX ABS Service Station Manual page 21

Stelvio 1200 NTX ABS
Crankcase - crankshaft - connecting rod
Specification
Diameter of crankshaft main journal, timing system side
Inside diameter of crankshaft bushing, timing system side
Clearance between bushing and main journal (timing system
Specification
Diameter of crankshaft main journal, clutch side
Inside diameter of crankshaft bushing on clutch-side flange
Clearance between bushing and main journal (clutch side)
Slot packing system
•
Fit both pistons on the connecting rods.
•
Working from both sides, fit the gasket
between the crankcase and the cylin-
der on the crankcase.
•
Fit both cylinders.
•
Take the left cylinder piston to TDC and
lock crankshaft rotation.
Specific tooling
020675Y Service shaft gear lock
•
Thoroughly clean the upper surface of
both cylinders.
•
Place the tool on the left cylinder to de-
termine the "squish" (X).
•
Fasten the tool with the nuts of the stud
bolts.
Specific tooling
020676Y Comparator support for piston posi-
tion checking
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
CRANKSHAFT SEAT (TIMING SYSTEM SIDE)
side)
CRANKSHAFT SEAT ( CLUTCH SIDE)
Desc./Quantity
37.975 - 37.959 mm (1.49507 - 1.49444 in)
38.016 - 38.0 mm (1.49669 - 1.49606 in)
0.025 - 0.057 mm (0.00098 - 0.00224 in)
Desc./Quantity
53.97 - 53.961 mm (2.12480 - 2.12444 in)
54.019 - 54.0 mm (2.12673 - 2.12598 in)
0.030 - 0.058 mm (0.00118 - 0.00228 in)
Characteristics
CHAR - 21