Engine
•
Unscrew and remove the two screws.
•
Remove the head.
•
Fit the timing system upper gear back
to the chain.
•
Fit the chain tensioner cap temporarily
and keep the chain taut on the service
shaft.
•
Collect the two head dowel pins.
•
Collect the gasket between the head
and the cylinder.
See also
Removing the head cover
Cylinder head
Removing the overhead camshaft
CAUTION
WHEN REMOVING THE COMPONENTS, MARK THE POSITION OF EACH PART VERY CARE-
FULLY IN ORDER TO PLACE THEM IN THEIR ORIGINAL POSITION UPON FITTING.
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
ENG - 136
Stelvio 1200 NTX ABS