MOTO GUZZI Stelvio 1200 NTX ABS Service Station Manual page 241

Stelvio 1200 NTX ABS
3. T-shaped bushing
4. Rubber ring
5. Radiator support
6. TCEI screw
7. Clip
Removing
It is necessary to remove the metal oil sump guard
in order to change the engine oil and replace the
oil filter:
•
Operating from both sides, unscrew
and remove both screws (1).
•
Remove the oil sump guard.
•
Place a collecting container and empty the lubrication system.
•
Unscrew and remove the two oil pipes
on the radiator.
•
Undo and remove the radiator lower
screw and collect the washer.
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
Chassis
CHAS - 241