Installing The Cylinder Head - MOTO GUZZI Stelvio 1200 NTX ABS Service Station Manual

Stelvio 1200 NTX ABS

Installing the cylinder head

•
Fit the valves in the head, if previously
removed.
•
Take the left cylinder piston to TDC and
lock crankshaft rotation.
•
Determine the thickness of the gasket
to be fitted between the head and the
cylinder as described in the section:
Shimming system.
•
Place the two dowel pins.
•
Fit the gasket with the correct thick-
ness between the head and the cylin-
der.
•
Fit the left cylinder head.
•
Fit a new O-ring in the spark plug hole.
•
Fit the complete cam cap.
•
Fix the cam cap with the four nuts on
the stud bolts.
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
Engine
ENG - 157