MOTO GUZZI Stelvio 1200 NTX ABS Service Station Manual page 273

Stelvio 1200 NTX ABS
•
Undo and remove the front lower
screw.
•
Undo and remove the three screws.
•
Remove the right under seat fairing.
•
Disconnect the connectors of the rear
brake lever switch and the speed sen-
sor.
•
Release the cable harness from the
clamps.
•
Undo and remove the two rear lower
screws; collect the washers and the
spacer.
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
Bodywork
BODYW - 273