Removing The Cylinder Head - MOTO GUZZI Stelvio 1200 NTX ABS Service Station Manual

Engine
•
Unscrew and remove the four head
cover fixing screws and collect the
sealing O-rings.
•
Remove the head cover together with
the gasket.

Removing the cylinder head

CAUTION
WHEN REMOVING THE COMPONENTS, MARK THE POSITION OF EACH PART VERY CARE-
FULLY IN ORDER TO PLACE THEM IN THEIR ORIGINAL POSITION UPON FITTING.
•
Remove the head cover.
•
Unscrew and remove the two screws
•
Remove the cap.
•
Unscrew and remove the screw.
•
Remove the timing system upper gear
bulkhead.
For the right head:
•
Unscrew and remove the chain ten-
sioner cap.
•
Remove the right chain tensioner.
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
ENG - 134
Stelvio 1200 NTX ABS