MOTO GUZZI Stelvio 1200 NTX ABS Service Station Manual page 262

Braking system
•
Extract one pad at a time.
CAUTION
AFTER REMOVING THE PADS, DO NOT OPERATE THE
BRAKE CONTROL LEVER OR THE CALLIPER PLUNGERS
COULD GO OUT OF THEIR SEATS RESULTING IN BRAKE
FLUID LEAKS.
Installing
•
Insert two new pads, placing them so
that the holes are aligned with the cal-
liper holes.
CAUTION
ALWAYS REPLACE BOTH PADS AND MAKE SURE THEY
ARE CORRECTLY POSITIONED INSIDE THE CALLIPER.
•
Insert the pin.
•
Position the split pin.
•
Abut the plungers against the pads,
acting on the brake pump pedal sever-
al times.
•
Check the brake fluid level in the res-
ervoir.
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
BRAK SYS - 262
Stelvio 1200 NTX ABS