MOTO GUZZI Stelvio 1200 NTX ABS Service Station Manual page 278

Bodywork
•
Disconnect the rear light connectors
•
Release the clutch bleeding pipe from
the cable guide.
•
Operating from both sides, undo and
remove the three screws.
•
Remove the mudflap.
•
Release from its and remove the
breather pipe placed on the right side
of the filter casing.
•
Operating on both sides, loosen the
clamp.
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
BODYW - 278
Stelvio 1200 NTX ABS