MOTO GUZZI Stelvio 1200 NTX ABS Service Station Manual page 234

Chassis
Remove the ball joint (4) with a suitable buffer and
a rubber hammer.
FITTING
Fit the stop ring (6) in the support (5) with suitable
pliers.
Turn the support (5) over.
Assemble the ball joint (4) with the buffer and a
rubber hammer.
Fit the stop ring (3) in the support (5) with suitable
pliers.
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
CHAS - 234
Stelvio 1200 NTX ABS