MOTO GUZZI Stelvio 1200 NTX ABS Service Station Manual page 229

Stelvio 1200 NTX ABS
Chassis
REMOVAL
Remove the bearing from the wheel axle with a
suitable extractor.
Turn the unit over.
Remove the bearing from the wheel axle with a
suitable extractor.
FITTING
Heat the bearings to 100°C (212 °F).
Assemble the bearings to the wheel axle.
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
CHAS - 229