Fuel Tank Cover - MOTO GUZZI Stelvio 1200 NTX ABS Service Station Manual

Bodywork
•
Remove the four TCEI 8x40 screws (1)
(two on each side)
•
Be careful to collect the four spacer
bushings inside the sump guard.
NOTE
FOR REFITTING, FOLLOW THE PROCEDURE IN THE REVERSE ORDER
Fuel tank
FUEL TANK CAP REMOVAL
•
Open the fuel tank cap.
•
Cover the tank fill opening with a clean
cloth so that no foreign bodies can
come in.
•
Undo and remove the four screws.
•
Remove the cap.

FUEL TANK COVER

•
Remove the rider saddle.
•
Operating from both sides, undo and
remove the three screws.
•
Collect the rubber rings of the rear
screws.
•
Remove the fuel tank cover.
See also
Seat
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
BODYW - 280
Stelvio 1200 NTX ABS