MOTO GUZZI Stelvio 1200 NTX ABS Service Station Manual page 242

Chassis
•
Undo and remove the two radiator up-
per screws and collect the washer.
•
Remove the oil cooling radiator.
Installing
•
Fit the oil cooling radiator on the vehi-
cle following the operations described
in the removal chapter but in reverse
order.
•
Pull out the oil filler plug / oil level dip-
stick (1).
•
Pour new oil until it goes over the min-
imum level marked "MIN" on the dip-
stick (1).
•
Insert the oil filler plug / oil level dipstick
(1).
•
Start the vehicle and let the engine run
for a few minutes so that the oil circu-
lates and fills the radiator internal
ducts.
•
Stop the engine and check the oil level
with the dipstick (1).
•
Fill with engine oil as required.
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
CHAS - 242
Stelvio 1200 NTX ABS