MOTO GUZZI Stelvio 1200 NTX ABS Service Station Manual page 92

Engine from vehicle
Installing the engine to the vehicle
•
Place the vehicle chassis over the en-
gine with the gear.
•
From the back, secure the chassis with
belts attached to a hoist.
•
From the front, secure the vehicle with
belts attached to the handlebar and
fixed to the work bench.
•
Lift the engine placing it in position.
•
Connect the oil pressure sensor con-
nector.
•
Working from the left side, fit the en-
gine upper bolt with the washer.
•
From the opposite side, fit the washer
and screw the nut.
•
Working on both sides, insert the
washer and screw the screw without
tighten it.
•
Working from the left side, fit the en-
gine lower bolt with the washer.
•
From the opposite side, fit the washer
and tighten the nut.
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
ENG VE - 92
Stelvio 1200 NTX ABS