MOTO GUZZI Stelvio 1200 NTX ABS Service Station Manual page 183

Stelvio 1200 NTX ABS
13 Lambda probe
14 Fall sensor
THROTTLE BODY PIPES LAYING
Pipes from the throttle body to the idle motor
should be laid so that the shaped part is inserted
in the air filter casing.
The shortest part of the fuel pipe connected to the
throttle bodies should be placed on the right.
Cylinders synchronisation
•
With engine off, connect the Axone
2000 tool to the diagnosis connector
and to the vehicle battery.
•
Turn on the scanner.
•
Screw the joints connecting the vacu-
ometer pipes on the inlet pipe holes.
•
Connect the vacuometer pipes to the
relative joints.
•
Set the key to ON.
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
Power supply
P SUPP - 183