Recovery Function - MOTO GUZZI Stelvio 1200 NTX ABS Service Station Manual

Hide thumbs Also See for Stelvio 1200 NTX ABS:
Table of Contents

Advertisement

Stelvio 1200 NTX ABS
If there is a larger difference:
act on the set screw of the throttle body
connecting rod to reduce the pressure
difference in the two pipes.
Repeat the procedure "Throttle posi-
tion self-learning" as explained above.
Bring the engine back to idle and check
the depression values so that they are
aligned between the two cylinders.
Otherwise, open only the screw with
higher depression, using the by-pass
screws, to compensate.

Recovery function

If the signal of the following sensors is interrupted, the control unit determines some values to keep the
engine running or it uses a different parameter. The instrument panel and the Axone also signal the
problem.
Specification
air temperature
engine temperature
barometric pressure
throttle valve potentiometer
idle motor
Using axone for injection system
Injection
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
RECOVERY FUNCTION
with linear increase from the air temperature at ignition
2.9° at idle, otherwise variable.
fixed value variable depending on the vehicle
Power supply
Desc./Quantity
25 °C (77 °F)
30 °C (86 °F)
1010 hPa
P SUPP - 185

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents