Rear Shock Absorbers Adjustment - MOTO GUZZI V7 Manual

Rear shock absorbers adjustment (03_04, 03_05)

The shock absorber has an adjuster ring (1) in order to regulate the spring preload
(2).
NOTE
IT IS POSSIBLE TO VARY THE PRE-LOAD OF THE SHOCK ABSORBERS DE-
PENDING ON THE LOAD ON THE VEHICLE (PASSENGER OR HEAVY LOAD).
IMPORTANT
TO PREVENT DAMAGE TO THE ADJUSTER SCREWS (1), NEVER FORCE THEM
03_04
BEYOND THE END OF TRAVEL IN EITHER DIRECTION.
•
Use the adjuster ring nut (1) to adjust the preload of the spring (2) with a hook
spanner (3);
•
Screw to increase pre-loading; and vice versa, screw to reduce it.
IMPORTANT
FOR PROPER VEHICLE STABILITY IT IS ALWAYS A GOOD IDEA TO MAKE
SURE THAT BOTH SHOCK ABSORBERS ARE SET TO THE SAME POSITION. IF
NECESSARY, CONTACT AN Official Moto Guzzi Dealership.
03_05
95