Electrical system
•
The connection must be between the
chassis and the air filter.
TABLE D - LAMBDA PROBE SYSTEM CLAMP-
ING
•
Clamp the stand system with the return
pipes in sump and leave the lambda
probe system free
•
The ground lead must be towards the
bottom, tighten the stud bolt nut to
10Nm (7.37 lbf ft).
TABLE E - BATTERY COMPARTMENT HOUS-
ING
•
The battery housing must be free of
any connections or pipes, in order to
allow perfect fitting.
Back side
CAUTION
ONCE THE ELECTRICAL SYSTEM IS REFITTED, THE CONNECTORS RECONNECTED AND
CLAMPS AND RETAINERS RESTORED, CARRY OUT THE CHECKS INDICATED UNDER "SPE-
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
ELE SYS - 48
Stelvio 1200 NTX ABS