Engine Cover - MOTO GUZZI Stelvio 1200 NTX ABS Service Station Manual

Stelvio 1200 NTX ABS
Tank to chassis front retainer
Right cover plate retainer - M10x20 (2)
Left cover plate retainer - M10 (1)
Front engine guard retainer - M8x40 (4)
Front mudguard retainer
Air deflector self-tapping retainer (4+4)
Fairing junction - M5 (2+2)
Glove-box - self-tapping (4)
Compartment lock - M6 (2)
Hinge locking bracket - self-tapping (2)
Rear tank cover - M5 (2)
Rear tank cover - M6 (2)
Left - right fairing - M5 (2)
Left - right fairing - M6 (2)
Left - right fairings retainer - M6 (3+3)
Retroreflector to support retainer
Retroreflector support to license plate holder retainer
License plate holder and light reinforcing retainer - M5 (1)
Cases support retainer - M6 (2)
Cases support retainer - M8 (2+2)
Passenger grab handle to chassis retainer - M8 (2)
Passenger grab handle to chassis retainer - M6 (4)
License plate holder to chassis retainer - M5 (4)
Luggage carrier brackets retainer - M8 (2+2)
Ignition lock retainer - shear head screw
Overhaul data
Assembly clearances
Cylinder - piston assy.
Measurement of the cylinder diameter must be done at three heights, turning the dial gauge 90°.
Check that cylinders and pistons are of the same selection types (D, E, F).
Check clearance between cylinders and pistons on the selected diameter; if it exceeds the value speci-
fied, it is necessary to replace cylinders and pistons.
The pistons of an engine must be balanced; a weight difference of up to 1.5 g (0.0033 lb) is allowed.
Specification
Piston diameter - selection D
Cylinder diameter - selection D
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
Name

ENGINE COVER

Name
FRONT BODYWORK
Name
REAR BODYWORK
Name
FINISHINGS
Name
PISTON - CYLINDER SELECTION TYPES
Torque in Nm
10 Nm
Torque in Nm
40 Nm (29.5 lbf ft)
40 Nm (29.5 lbf ft)
15 Nm (11.06 lbf ft)
Torque in Nm
6 Nm
Manual
Manual
Manual
Manual
Manual
4 Nm (2.95 lbf ft)
10 Nm (7.38 lbf ft)
4 Nm (2.95 lbf ft)
10 Nm (7.38 lbf ft)
Torque in Nm
10 Nm (7.38 lbf ft)
4 Nm
4 Nm
4 Nm (2.95 lbf ft)
10 Nm (7.38 lbf ft)
25 Nm (18.44 lbf ft)
25 Nm (18.44 lbf ft)
10 Nm (7.38 lbf ft)
4 Nm (2.95 lbf ft)
25 Nm (18.44 lbf ft)
Torque in Nm
- Nm
Desc./Quantity
94.935 - 94.945 mm (3.73759 - 3.73798 in)
95.000 - 95.010 mm (3.74015 - 3.74054 in)
Characteristics
CHAR - 19