MOTO GUZZI Stelvio 1200 NTX ABS Service Station Manual page 170

Engine
•
Remove the nipple - oil pump fitting.
•
Bring the left cylinder piston to the TDC
in combustion phase.
•
Mark a reference on the oil pump con-
trol gear and another on the driven
gear so as to place them correctly
again upon refitting.
•
Unscrew and remove the nut on the
crankshaft.
•
Remove the oil pump control gear.
•
Screw the nut again so that the internal
shim washer does not fall in the crank-
shaft crankcase.
•
Unscrew and remove the driven gear
nut.
•
Collect the washer.
•
Remove the oil pump driven gear.
•
Remove the driving pin.
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
ENG - 170
Stelvio 1200 NTX ABS