MOTO GUZZI Stelvio 1200 NTX ABS Service Station Manual page 142

Engine
•
Place the two rocking levers in the cam
tower seats.
•
Place the U-bolt on the rocking levers
making sure the two reference pins
match the seats on the cam tower.
•
Tighten the two screws operating diag-
onally and in stages.
See also
Installing the overhead camshaft
Installing the overhead camshaft
•
Place the bowls in the cam tower, if
those previously removed are refitted
be careful not to interchange them.
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
ENG - 142
Stelvio 1200 NTX ABS