MOTO GUZZI Stelvio 1200 NTX ABS Service Station Manual page 130

Engine
•
Place the clutch pressure plate.
•
Fit the tool to centre and compress the
plate.
•
Fully tighten the two centring tool
screws.
Specific tooling
020672Y Clutch spring centre and pusher
•
Once the centring tool is fitted, lock the
plate with the snap ring.
•
Undo and remove the two screws fixing
the tool.
•
Remove the special tool.
•
Place the friction disc; centre it.
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
ENG - 130
Stelvio 1200 NTX ABS