MOTO GUZZI Stelvio 1200 NTX ABS Service Station Manual page 144

Engine
Removing the generator
Service shaft removal
•
Remove the tone wheel.
•
Remove both cylinders.
•
Undo and remove the two screws.
•
Remove the service shaft closing cap.
•
Mark the timing chains so as not to in-
vert the direction of rotation upon fit-
ting.
•
Slide off the service shaft from the
chains.
•
Remove both chains.
See also
Removing the phonic wheel
Installing the service shaft
•
Place the service shaft bearing (if pre-
viously removed) on the crankcase.
•
Fix it to the seat with the lock washer
and screw.
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
ENG - 144
Stelvio 1200 NTX ABS